I will quickly provide some window sill wood rot repair tips that you can consider for you house windows. I have tried to simplify them so you can read right through to the end with ease.
o You need to start by taking all the necessary measurements of the window sill. This includes the thickness, the width and also the length.
o You need to find a way to get access to the sill. You can do this by removing the side pieces of casing trim. You may also need to remove the sash channel trim first.
o Use pliers to remove the nails in the trim. You must pull out all the nails from the walls and in the window jamb.
o Then you can now remove the sill piece. Just try not to damage it.
o You can then take the old sill to your local contractor or suppler to buy some replacement lumber. You must also buy some 8d or 6d finish nails. In fact ask the seller for some recommendations.
o Use the old lumber to trace a pattern on the new one. Be certain that your measurements are accurate and then use those with the new lumber.
o You may have to cut out the new sill. if the seller can't do it for you simply use a saber saw. To smooth out the cuts make sure you use a fine-toothed blade.
o If there are any exposed end grain cuts consider sanding.
o Once you have done that you can then fit the sill you have just bought in place and nail it in carefully.
o Then replace the casing trim or siding pieces you removed earlier on.
o Once everything is positioned into place nail all the pieces securely.
o You should then fill all the nail holes with some wood putty. This includes both old and new holes.
o Then stain or paint to fit your home decor.
Home these window sill wood rot repair tips will enable you to have a clear direction on your project.
